Home > News

News

07/13/2016
.Upward mould, special structure; vertically feeding, never buff placer, feeding material with wide inlet, and easier heat dissipation. 
2.Die static, roller rotating, material centrifugation, distributed around evenly; because of the die high side, the
07/07/2016
Vertical ring die wood sawdust pellet manufacturing press machine , feeding vertically, the raw materials can follow to the pelleting room directly.
-Vertical ring die structure, easy for heating dissipation, which can keep the machine running continuall
06/29/2016
1 Raw material plate which is arranged reasonably with chargeable angles in order, throws moisture material into the rotary cyclinder, the water will be separated from the materials by hot airflow and changedinto vaport tobe discharged into the atmosphere
06/21/2016
wood chipping machine is the preparation of a variety of high-quality wood and special equipment, used in paper mills, particle board plant, wood fiberboard factory production and export base
06/14/2016
1. Brief Introduction:
Double-shaft Shredder, also named biaxial shredder, decreases the size of  raw materials through shearing, tearing and squeezing. This machine is widly used to process waste plastic, waste rubber, wood, crop straw and other waste o
06/07/2016
Raw sawdust dryer requires no larger than the diameter of 12mm, water can not be greater than 50%, after the wood moisture after drying in 15% yield 3-6 tons per hour, drying and granulation section recommendations and Powder Section dealt with separately
05/30/2016
1).We use high precision gear drive. capacity can be 20% larger than that of belt drive. Driven with heavy-duty gearbox construction, it can produce continuously in most adverse condition.
2).The imported key elements are of high performance with long li
05/23/2016
1. Structure of main machine is beautiful,easy installation and little space taking.
2. Driving wheel in feed inlet synchronous run together with the feed wheel in main body.
3. Snap-in feedstock is stronger and more powerfull.
04/28/2016
Sawdust dryer uses German technology, three-channel technology, high yield, low energy consumption, small footprint, using the cyclone furnace stove, three minutes the temperature can reach 500 °,
04/25/2016
Raw sawdust dryer requires no larger than the diameter of 12mm, water can not be greater than 50%, after the wood moisture after drying in 15% yield 3-6 tons per hour, drying and granulation section recommendations and Powder Section dealt with separately
TOP