Home > Company News

Company News

Rotary drum air dryer is designed for dry wood chips, wood flour and other biomass research and development of the design of the drying equipment, but also according to the direction of transformation of raw materials, the same applies to livestock and po
The raw material quality of wood pellet machine has a direct influence on the particle quality. So, what are the requirements of the raw materials of the sawdust particles?
First, the size of raw materials are required
The mechanism of wood pellet parti
wood pellet  machine suddenly brake does not run, this problem occurs for many reasons, the first power is turned off, or the particle machine fuse is broken, which is often encountered problems, the fuse received a high-power use and Too tired will burn
Working principle of sawdust dryerThe sawdust dryer includes a heating furnace, a feeding port, a rotating cylinder, a filter tube, a material conveying pipe, a cooling cylinder and a discharging outlet. The rotating drum is arranged on the driving roller
At present, due to the popularity of wood particles enterprises and the increase in particle production, particle machine mold demand also increased. So some small manufacturers of poor quality wood chips machine mold also flows into the market, some prod
The pellet mill system is the important part of the whole process, and the granulator is the key equipment in the pelleting system. Whether the operation is normal or not, it will directly affect the quality of the final product.
Corn stalk wood pellet machine is the straw pressed into granular machinery and equipment. Straw particle machine is based on crop straw as raw material, through the granule machine to suppress the cylindrical particles, straw particles in addition to bio
wood pellet machine is necessary to carry out reasonable maintenance idle, ring mold as a major component of biomass pellet machine, the preservation conditions is also very important, then how to save it?
   Biomass pellet machine ring mold which condit
Adjustment of mold roll gap
         (1) and the outer surface area of the pressure roller (2), loosen the retreat nut (6), and then remove the mold cover, (2) adjust the direction of the arrow wheel to adjust the gap, the gap becomes smaller, in the opp
Biomass wood pellet machine, if used improperly, will produce the output is lower than the standard expected production of the situation, the use of a long time there will be a decline in production problems. As a professional manufacturer of biomass pell