Home > Company News

The size of the sawdust and the moisture is the factor that determines the molding of the sawdust pellet

The size of the sawdust and the moisture is the factor that determines the molding of the sawdust pellet
Many users in the use of sawdust particles when the machine is often difficult for the molding effect or yield is not up and distress. Let me now introduce some questions about this. The main factor in the formation of sawdust granules is the size and moisture of the sawdust. These two points are crucial. In general, we require the size of the sawdust can not be greater than the sawdust pellet machine processing particles of the diameter of two-thirds is about 5-6mm. If the size is too large, the raw material in the granulation chamber will be lengthened, which is a direct impact on the output, and the raw material is too large, then need to crush in the granulation chamber to enter the grinding hole, Wheel wear increases.
Sawdust pellet machine requires wood moisture is generally between 15% -20%. If the water is too large to work out the surface of the particles is not smooth cracks and then the water will not directly forming a large. If the water is too small, then the wood chip particles of the high rate of powder or not directly out of the particles.
TOP